ZyXEL NWA110AX User Guide - Page 48
WAC6103D-I
View all ZyXEL NWA110AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 3 Hardware Table 15 WAC6502D-E, WAC6502D-S, or WAC6503D-S LEDs (continued) LED COLOR STATUS DESCRIPTION Management Green WLAN Amber Green Amber Green Green On Slow Blinking (Blink for 3 times, Off for 3s) Slow Blinking (On for 1s, Off for 1s) Off Blinks amber for 1 second and green for 1 second alternatively Blinks amber and green alternatively 3 times and then turns solid green for 3 seconds. On Off The Zyxel Device is managed by a the NCC or an AC. The Zyxel Device is searching (discovery) for an AC. The Zyxel Device is using default wireless settings, or the Zyxel Device is connected to the NCC but is unregistered with the NCC. The Zyxel Device is in standalone mode. The Zyxel Device is searching (discovery) for the NCC. The NCC is connecting to the registered Zyxel Device. The 2.4 GHz WLAN is active. The 2.4 GHz WLAN is not active. WLAN Green On Off The 5 GHz WLAN is active. The 5 GHz WLAN is not active. UPLINK LAN Locator Amber Green Amber Green White On Blinking On Blinking Off On Blinking On Blinking Off Blinking Off The port is operating as a 100 Mbps connection. The Zyxel Device is sending/receiving data through the port at 100 Mbps. The port is operating as a Gigabit connection (1000 Mbps). The Zyxel Device is sending/receiving data through the port at 1 Gbps. The port is not connected. The port is operating as a 100 Mbps connection. The LAN port is sending/receiving data through the port at 100 Mbps. The port is operating as a Gigabit connection (1000 Mbps). The LAN port is sending/receiving data through the port at 1 Gbps. The LAN port is not connected. The Locator is activated and will blink to show the actual location of the Zyxel Device between several devices in the network. The Locator function is off. 3.3.4 WAC6103D-I The following are the LED descriptions for your WAC6103D-I. NWA/WAC/WAX Series User's Guide 48