ZyXEL NWA110AX User Guide - Page 77
VLAN ID, Band Mode, Security Type, Personal, Enterprise, Primary / Secondary RADIUS Server, Cancel
View all ZyXEL NWA110AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Chapter 7 Setup Wizard The screen varies depending on the security type you selected. • SSID: Enter a descriptive name of up to 32 printable characters for the wireless LAN. • VLAN ID: Enter a VLAN ID for the Zyxel Device to use to tag traffic originating from this SSID. Band Mode: Select the wireless band which this profile should use. 2.4 GHz is the frequency used by IEEE 802.11b/g/n wireless clients. 5 GHz is the frequency used by IEEE 802.11ac/a/n wireless clients. • Security Type: Select WPA2 to add security on this wireless network. Otherwise, select OPEN to allow any wireless client to associate this network without authentication. • Personal: If you set Security Type to WPA2 and select Personal, enter a pre-shared key of between 8 and 63 case-sensitive ASCII characters (including spaces and symbols) or 64 hexadecimal characters. • Enterprise: Select this option and the Primary / Secondary RADIUS Server check box to have the Zyxel Device use the specified RADIUS server. You have to enter the IP address, port number and shared secret password of the RADIUS server to be used for authentication. Click OK to proceed. Click Cancel to close the screen without saving. Figure 36 Wizard: SSID: Edit (WPA2-Personal) NWA/WAC/WAX Series User's Guide 77