ZyXEL NWA110AX User Guide - Page 50
WAC5302D-S
View all ZyXEL NWA110AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Chapter 3 Hardware Table 16 WAC6103D-I LEDs (continued) LED COLOR STATUS Management Green On Slow Blinking (Blink for 3 times, Off for 3s) Slow Blinking (On for 1s, Off for 1s) WLAN WLAN UPLINK Amber Green Amber Green Green Amber Green Amber Amber Off Blinks amber for 1 second and green for 1 second alternatively Blinks amber and green alternatively 3 times and then turns solid green for 3 seconds. On On Off On On Off On Blinking Green On Blinking Off LAN Amber On Blinking Green On Blinking Locator White Off Blinking Off DESCRIPTION The Zyxel Device is managed by an AC or the NCC. The Zyxel Device is searching (discovery) for an AC. The Zyxel Device is using default wireless settings, or the Zyxel Device is connected to the NCC but is unregistered with the NCC. The Zyxel Device is in standalone mode. The Zyxel Device is searching (discovery) for the NCC. The NCC is connecting to the registered Zyxel Device. The 2.4 GHz radio is set to "Ceiling" and is active. The 2.4 GHz radio is set to "Wall" and is active. The 2.4 GHz WLAN is not active. The 5 GHz radio is set to "Ceiling" and is active. The 5 GHz radio is set to "Wall" and is active. The 5 GHz WLAN is not active. The port is operating as a 100 Mbps connection. The Zyxel Device is sending/receiving data through the port at 100 Mbps. The port is operating as a Gigabit connection (1000 Mbps). The Zyxel Device is sending/receiving data through the port at 1 Gbps. The port is not connected. The port is operating as a 100 Mbps connection. The LAN port is sending/receiving data through the port at 100 Mbps. The port is operating as a Gigabit connection (1000 Mbps). The LAN port is sending/receiving data through the port at 1 Gbps. The LAN port is not connected. The Locator is activated and will blink to show the actual location of the Zyxel Device between several devices in the network. The Locator function is off. 3.3.5 WAC5302D-S The LEDs automatically turn off when the WAC5302D-S is ready. You can press the LED ON button for one second to turn on the LEDs again. The LEDs will blink and turn off after two minutes. NWA/WAC/WAX Series User's Guide 50