ZyXEL NWA110AX User Guide - Page 80
Network Status
View all ZyXEL NWA110AX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Chapter 8 Monitor 8.3 Network Status Use this screen to look at general Ethernet interface information and packet statistics. To access this screen, click Monitor > Network Status. Figure 39 Monitor > Network Status The following table describes the labels in this screen. Table 29 Monitor > Network Status LABEL DESCRIPTION Interface Summary IPv6 Interface Summary Name Status Use the Interface Summary section for IPv4 network settings. Use the IPv6 Interface Summary section for IPv6 network settings if you connect your Zyxel Device to an IPv6 network. Both sections have similar fields as described below. This field displays the name of the physical Ethernet port on the Zyxel Device. This field displays the current status of each physical port on the Zyxel Device. Down - The port is not connected. VID IP Addr/Netmask IP Address IP Assignment Speed / Duplex - The port is connected. This field displays the port speed and duplex setting (Full or Half). This field displays the VLAN ID to which the port belongs. This field displays the current IP address (and subnet mask) of the interface. If the IP address is 0.0.0.0 (in the IPv4 network) or :: (in the IPv6 network), the interface does not have an IP address yet. This field displays how the interface gets its IPv4 address. Static - This interface has a static IPv4 address. DHCP Client - This interface gets its IPv4 address from a DHCP server. Action Use this field to get or to update the IP address for the interface. Click Renew to send a new DHCP request to a DHCP server. If the interface cannot use one of these ways to get or to update its IP address, this field displays n/a. Port Statistics Table Poll Interval Enter how often you want this window to be updated automatically, and click Set Interval. NWA/WAC/WAX Series User's Guide 80