ZyXEL NXC2500 User Guide - Page 101
Nebula, Monitor >, Wireless > AP Information > AP List, LABEL, DESCRIPTION
View all ZyXEL NXC2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Chapter 6 Monitor Note: It is highly recommended that you register the AP with the NCC before pressing the Nebula button to change its management mode. To access this screen, select a tri-mode AP from the list and click the Nebula button in the Monitor > Wireless > AP Information > AP List screen. Figure 57 Monitor > Wireless > AP Information > AP List > Change mode behavior The following table describes the labels in this screen. Table 43 Monitor > Wireless > AP Information > AP List > Change mode behavior LABEL DESCRIPTION Change to cloud mode with retain current IP and VLAN settings. Select this option to have the AP run in Nebula cloud management mode without changing its IP address and VLAN settings. Change to cloud mode with specific IP and VLAN settings Select this option to have the AP run in Nebula cloud management mode using the IP address and VLAN settings you configure below. Get Automatically Select this to make the AP a DHCP client and automatically get the IP address, subnet mask, and gateway address from a DHCP server. Use Fixed IP Address Select this if you want to specify the IP address, subnet mask, gateway and DNS server address manually. VLAN ID Enter a management VLAN ID for the AP. Untagged/Tagged Set whether the AP adds the VLAN ID to outbound traffic transmitted through its Ethernet port. IP Address Enter the IP address for the AP. Subnet Mask Enter the subnet mask of the AP in dot decimal notation. The subnet mask indicates what part of the IP address is the same for all devices in the network. Gateway Enter the IP address of the gateway. The AP sends packets to the gateway when it does not know how to route the packet to its destination. The gateway should be on the same network as the AP. DNS Enter the IP address of the DNS server. NXC Series User's Guide 101