ZyXEL NXC2500 User Guide - Page 96
Monitor, NXC Series User's Guide, Table 39, Monitor > Wireless > AP Information >
View all ZyXEL NXC2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
Chapter 6 Monitor Table 39 Monitor > Wireless > AP Information > AP List > Edit AP List (continued) LABEL DESCRIPTION Inactivate # Status To turn off an entry, select it and click Inactivate. This field is a sequential value, and it is not associated with a specific entry. This field shows whether or not the entry is activated. UUID Major Minor IP Setting Force Overwrite IP Setting Get Automatically Use Fixed IP Address IP Address Subnet Mask Gateway DNS Server IP Address VLAN Settings Override Group VLAN Setting Force Overwrite VLAN Config Management VLAN ID As Native VLAN Port Settings Override Group LAN Setting Port Setting Edit Activate/ Inactivate # Status Port PVID A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active. This field indicates the UUID to be included in the Bluetooth advertising packets. This field indicates the major number to be included in the Bluetooth advertising packets. This field indicates the minor number to be included in the Bluetooth advertising packets. Select this to have the NXC change the AP's IP address setting to match the configuration in this screen. Select this to have the AP act as a DHCP client and automatically get the IP address, subnet mask, and gateway address from a DHCP server. Select this if you want to specify the IP address, subnet mask, gateway and DNS server address manually. Enter the IP address for the AP. Enter the subnet mask of the AP in dot decimal notation. The subnet mask indicates what part of the IP address is the same for all devices in the network. Enter the IP address of the gateway. The AP sends packets to the gateway when it does not know how to route the packet to its destination. The gateway should be on the same network as the AP. Enter the IP address of the DNS server. Select this option to overwrite the AP VLAN setting with the setting you configure here. Select this to have the NXC change the AP's management VLAN to match the configuration in this screen. Enter a VLAN ID for this AP. Select this option to treat this VLAN ID as a VLAN created on the NXC and not one assigned to it from outside the network. Select this option to overwrite the AP LAN port settings with the settings you configure here. This section displays only when you select Override Group LAN Setting. Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. See Section 6.11.2.2 on page 99. To turn on an entry, select it and click Activate. To turn off an entry, select it and click Inactivate. This is the port's index number in this list. This displays whether or not the port is activated. This shows the name of the physical Ethernet port on the managed AP. This shows the port's PVID. A PVID (Port VLAN ID) is a tag that adds to incoming untagged frames received on a port so that the frames are forwarded to the VLAN group that the tag defines. NXC Series User's Guide 96