ZyXEL NXC2500 User Guide - Page 61
Label, Description
View all ZyXEL NXC2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 5 Dashboard Table 18 Dashboard (continued) LABEL DESCRIPTION Boot Status This field displays details about the NXC's startup state. OK - The NXC started up successfully. Firmware update OK - A firmware update was successful. Problematic configuration after firmware update - The application of the configuration failed after a firmware upgrade. System default configuration - The NXC successfully applied the system default configuration. This occurs when the NXC starts for the first time or you intentionally reset the NXC to the system default settings. Fallback to lastgood configuration - The NXC was unable to apply the startup-config.conf configuration file and fell back to the lastgood.conf configuration file. Fallback to system default configuration - The NXC was unable to apply the lastgood.conf configuration file and fell back to the system default configuration file (systemdefault.conf). Booting in progress - The NXC is still applying the system configuration. Device Information System Name This field displays the name used to identify the NXC on any network. Click the link to open the screen where you can change it. System Location This field displays the location of the NXC. Click the link to open the screen where you can change it. Model Name This field displays the model name of this NXC. Serial Number This field displays the serial number of this NXC. MAC Address Range This field displays the MAC addresses used by the NXC. Each physical port has one MAC address. The first MAC address is assigned to physical port 1, the second MAC address is assigned to physical port 2, and so on. Firmware Version This field displays the version number and date of the firmware the NXC is currently running. Click the link to open the screen where you can upload firmware. Licensed Service Status # This shows how many licensed services there are. Status This is the current status of the license. Name This identifies the licensed service. Version This is the version number of the service. Expiration If the service license is valid, this shows when it will expire. n/a displays if the service license does not have a limited period of validity. 0 displays if the service is not licensed or has expired. Extension Slot This section of the screen displays the status of the USB ports. # This field displays how many USB ports there are. Extension Slot This field displays the name of each extension slot. Device This field displays the name of the device connected to the extension slot (or none if no device is detected). Status Ready - A USB storage device connected to the NXC is ready for the NXC to use. AP Information AP none - The NXC is unable to mount a USB storage device connected to the NXC. This shows a summary of connected wireless Access Points (APs). This displays the number of currently connected managed APs and the number of all managed APs. Click the link to go to the Monitor > Wireless > AP information > AP List screen. NXC Series User's Guide 61