ZyXEL NXC2500 User Guide - Page 87
Configuration > Wireless > Controller, Registration, Always Accept, LABEL, DESCRIPTION - factory reset
View all ZyXEL NXC2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Chapter 6 Monitor Table 36 Monitor > Wireless > AP Information > AP List (continued) LABEL DESCRIPTION Keyword Search Enter a keyword to display the APs that include it in their AP information, such as model number, firmware version, MAC address and so on. This field is case-sensitive. Click this to update the list of APs based on the search criteria. Reset Enable Column Freeze Edit the selected rule Add to Mgmt AP List Reboot device Your search criteria is retained when navigating between screens. Click this to return the search criteria to the factory defaults and display all currently or previously connected APs without a filter. Select the check box to freeze the first column (#) so it will be always visible when you scroll through the list. Clear the check box to unfreeze the column. Select an AP and click this to change the selected AP's properties, such as its group, radio, VLAN and port settings. Select an AP and click this to add the selected AP to the managed AP list. Select one or multiple APs and click this button to force the AP(s) to restart. Remove the selected rule DCS Now Select one or multiple APs and click this button to remove the AP(s) from the manged AP list. Note: If in the Configuration > Wireless > Controller screen you set the Registration Type to Always Accept, then as soon as you remove an AP from this list it reconnects. Select one or multiple APs and click this button to use DCS (Dynamic Channel Selection) to allow the AP to automatically find a less-used channel in an environment where there are many APs and there may be interference. Note: You should have enabled DCS in the applied AP radio profile before the APs can use DCS. Note: DCS is not supported on the radio which is working in repeater AP mode. More Information Select an AP and click this to view a daily station count about the selected AP. The count records station activity on the AP over a consecutive 24 hour period. Radio Information Select an online AP and click this button to go to the Monitor > Wireless > AP Information > Radio List screen to view detailed information about the AP's radios. Query Controller Select one or multiple APs and click this button to go to the Monitor > Log > View Log screen to Log view the selected AP's current log messages. Nebula Select an AP and click this to open a screen where you can set whether the AP's IP address and VLAN settings will be changed when it goes into Nebula cloud management mode. See Section 6.11.2.4 on page 100. Upgrade Firmware Now Note: The AP will be set to Nebula cloud management mode and removed from the managed AP list right after you click OK. Select one or more APs and click this button to update the APs' firmware version. Suppression On Suppression Off Locator On Select an AP and click this button to enable the AP's LED suppression mode. All the LEDs of the AP will turn off after the AP is ready. This button is not available if the selected AP doesn't support suppression mode. Select an AP and click this button to disable the AP's LED suppression mode. The AP LEDs stay lit after the AP is ready. This button is not available if the selected AP doesn't support suppression mode. Select an AP and click this button to run the locator feature. The AP's Locator LED will start to blink for 10 minutes by default. It will show the actual location of the AP between several devices in the network. NXC Series User's Guide 87