ZyXEL NXC2500 User Guide - Page 132

Chapter 8 Wireless Each field is described in the following table. Table 58 Configuration > Wireless > AP Management > AP Group LABEL DESCRIPTION Group Setting Default Group Select a group that is used as the default group. Any AP that is not configured to associate with a specific AP group belongs to the default group automatically. Group Summary Add Click this button to create a new AP group. Edit Select an AP group and click this button to edit its properties. Remove Select an AP group and click this button to remove it from the list. Reboot DCS Now Note: You cannot remove a group with which an AP is associated. Select an AP group and click this button to force the AP(s) in this group to restart. Select one or multiple groups and click this button to use DCS (Dynamic Channel Selection) to allow the APs in the group(s) to automatically find a less-used channel in an environment where there are many APs and there may be interference. Note: You should have enabled DCS in the applied AP radio profile before the APs can use DCS. Upgrade Now # Group Name Member Count Apply Reset Note: DCS is not supported on the radio which is working in repeater AP mode. Select an AP group and click this button to upgrade the firmware of the APs to the NXC's latest supported version. This is the index number of the group in the list. This is the name of the group. This is the total number of APs which belong to this group. Click Apply to save your changes back to the NXC. Click Reset to return the screen to its last-saved settings. NXC Series User's Guide 132