ZyXEL NXC2500 User Guide - Page 155
IP Pool, Start Address, Pool Size, Interface Type, External, General, Clone by host, Policy Route,
View all ZyXEL NXC2500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Chapter 9 Interfaces Table 65 Configuration > Network > Interface > Ethernet > Edit (continued) LABEL DESCRIPTION Edit Select an entry in this table and click this to modify it. Remove Select an entry in this table and click this to delete it. # This field is a sequential value, and it is not associated with any entry. Name This is the name of the DHCP option. Code This is the code number of the DHCP option. Type This is the type of the set value for the DHCP option. Value This is the value set for the DHCP option. Enable IP/MAC Binding Select this option to have this interface enforce links between specific IP addresses and specific MAC addresses. This stops anyone else from manually using a bound IP address on another device connected to this interface. Use this to make use only the intended users get to use specific IP addresses. Enable Logs for IP/MAC Binding Violation Select this option to have the NXC generate a log if a device connected to this interface attempts to use an IP address that is bound to another device's MAC address. Static DHCP Table Configure a list of static IP addresses the NXC assigns to computers connected to the interface. Otherwise, the NXC assigns an IP address dynamically using the interface's IP Pool Start Address and Pool Size. Add Click this to create a new entry. Edit Select an entry and click this to be able to modify it. Remove Select an entry and click this to delete it. # This field is a sequential value, and it is not associated with a specific entry. IP Address Enter the IP address to assign to a device with this entry's MAC address. MAC Enter the MAC address to which to assign this entry's IP address. Description Enter a description to help identify this static DHCP entry. You can use alphanumeric and characters, and it can be up to 60 characters long. MAC Address Setting These fields appear when you set the Interface Type to External or General. Use Default MAC Address Overwrite Default MAC Address Related Setting Configure Policy Route Have the interface use either the factory assigned default MAC address, a manually specified MAC address, or clone the MAC address of another device or computer. Select this option to have the interface use the factory assigned default MAC address. By default, the NXC uses the factory assigned MAC address to identify itself. Select this option to have the interface use a different MAC address. Either enter the MAC address in the fields or click Clone by host and enter the IP address of the device or computer whose MAC you are cloning. Once it is successfully configured, the address will be copied to the configuration file. It will not change unless you change the setting or upload a different configuration file. Click Policy Route to go to the policy route summary screen where you can manually associate traffic with this interface. OK Cancel You must manually configure a policy route to add routing and SNAT settings for an interface with the Interface Type set to General. You can also configure a policy route to override the default routing and SNAT behavior for an interface with the Interface Type set to Internal or External. Click OK to save your changes back to the NXC. Click Cancel to exit this screen without saving. NXC Series User's Guide 155