ZyXEL NXC2500 User Guide - Page 131

Chapter 8 Wireless Table 57 Configuration > Wireless > AP Management > AP Policy (continued) LABEL DESCRIPTION Primary Controller Specify the IP address of the primary AP controller if you set Override Type to Manual. Secondary Controller Specify the IP address of the secondary AP controller if you set Override Type to Manual. Fall back to Primary Controller when possible Select this option to have the managed AP(s) change back to associate with the primary AP controller as soon as the primary AP controller is available. Fall Back Check Interval Set how often the managed AP(s) check whether the primary AP controller is available. Firmware Updating Updating Method Specify how you want the NXC to upgrade AP firmware. Select CAPWAP to have the NXC use CAPWAP to automatically update firmware on the managed APs. Updating Mode Select FTP to allow the managed APs to download the latest firmware from the NXC using FTP. Select Auto so the NXC checks the AP's firmware version and updates it automatically to the NXC's latest supported version. Apply Reset Select Manual so you update the AP firmware manually. Click Apply to save your changes back to the NXC. Click Reset to return the screen to its last-saved settings. 8.3.3 AP Group Use this screen to configure AP groups, which define the radio, port, VLAN and load balancing settings and apply the settings to all APs in the group. An AP can belong to one AP group at a time. Click Configuration > Wireless > AP Management > AP Group to access this screen. Figure 72 Configuration > Wireless > AP Management > AP Group NXC Series User's Guide 131