ZyXEL PLA450 v2 Quick Start Guide - Page 3
Initial Hardware Connections, 1 Look at the LEDs lights
View all ZyXEL PLA450 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
ENGLISH 1 Initial Hardware Connections 1 2 3 1 Screw the antenna clockwise onto the antenna connector. Make sure it is securely attached. Point the antenna up (perpendicular to the ground). 2 Use the yellow (Ethernet) cable to connect the PLA450's LAN port to the Ethernet port on your computer. 3 Use the included power cord to connect the POWER socket to an appropriate power source. This is also your powerline connection. 1.1 Look at the LEDs (lights) • Power ( ): Blinks until the device is ready. • HomePlug ( ): Turns on when connected to other HomePlug AV device(s). • LAN ( ): Turns on if the LAN connection to your computer is OK. • WLAN ( ): Turns on if the wireless LAN feature is on. 3
ENGLISH
3
1 Initial Hardware Connections
1
Screw the antenna clockwise onto the antenna connector. Make sure it is securely
attached. Point the antenna up (perpendicular to the ground).
2
Use the yellow (Ethernet) cable to connect the PLA450’s
LAN
port to the Ethernet port
on your computer.
3
Use the included power cord to connect the
POWER
socket to an appropriate power
source. This is also your powerline connection.
1.1 Look at the LEDs (lights)
•
Power
(
): Blinks until the device is ready
.
•
HomePlug
(
): Turns on when connected to other HomePlug AV device(s).
•
LAN
(
): Turns on if the LAN connection to your computer is OK.
•
WLAN
(
): Turns on if the wireless LAN feature is on.
1
2
3