ZyXEL PLA450 v2 Quick Start Guide - Page 5
Log Into the Web Configurator, Make a note of your original settings
View all ZyXEL PLA450 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENGLISH 3 Select Internet Protocol (TCP/IP) (A). Then click Properties (B). A B " Make a note of your original settings in (C) in the following screen if you will return the computer to its original hardware connections after configuring the PLA450. 4 Type 192.168.1.x as the IP address, where x is a number between 3 and 254. Avoid IP addresses taken by other devices on your network, such as 192.168.1.2, which is the PLA450's default IP address. Type 255.255.255.0 as the Subnet mask. Click OK. C 2.2 Log Into the Web Configurator The PLA450's web configurator lets you enter and change settings. 5
ENGLISH
5
3
Select
Internet Protocol (TCP/IP)
(
A
). Then click
Properties
(
B
).
Make a note of your original settings in (
C
) in the following screen if you will
return the computer to its original hardware connections after configuring
the PLA450.
4
Type
192.168.1.x
as the
IP address
, where
x
is a number between 3 and 254. Avoid IP
addresses taken by other devices on your network, such as
192.168.1.2
, which is the
PLA450’s default IP address. Type
255.255.255.0
as the
Subnet mask
. Click
OK.
2.2 Log Into the Web Configurator
The PLA450’s web configurator lets you enter and change settings.
B
A
C