ZyXEL VES1724-56B2 User Guide - Page 216

Chapter 23 VLAN Stacking The following table describes the labels in this screen. Table 94 VLAN Stacking > Port-based InnerQ LABEL Port * Active CPVID Priority Remove InnerQ Apply Cancel DESCRIPTION The port number identifies the port you are configuring. Settings in this row apply to all ports. Use this row only if you want to make some settings the same for all ports. Use this row first to set the common settings and then make adjustments on a port-by-port basis. Changes in this row are copied to all the ports as soon as you make them. Check this box to activate this rule. CPVID is the customer port VLAN ID (the inner VLAN tag). Enter the customer VLAN ID (from 1 to 4094) for frames received on this port. See Chapter 10 on page 129 for more background information on VLAN ID. Select a priority level (from 0 to 7). This is the priority level in the customer VLAN tag that adds to the frames received on this port. "0" is the lowest priority level and "7" is the highest. Select the check box to remove the customer VLAN tag from outgoing traffic on this port. This feature is not applicable on a tunnel port. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the non-volatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 216 VES1724-56 User's Guide