ZyXEL VMG9823 User Guide - Page 160
The Port Triggering Screen
View all ZyXEL VMG9823 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
Chapter 11 Network Address Translation (NAT) 11.3.1 Add New Application This screen lets you create new NAT application rules. Click Add New Application in the Applications screen to open the following screen. Figure 78 Network Setting > NAT > Applications: Add The following table describes the labels in this screen. Table 57 Network Setting > NAT > Applications: Add LABEL DESCRIPTION WAN Interface Select the WAN interface that you want to apply this NAT rule to. Server IP Address Enter the inside IP address of the application here. Application Category Select the category of the application from the drop-down list box. Application Forwarded Select a service from the drop-down list box and the VMG automatically configures the protocol, start, end, and map port number that define the service. View Rules Click this to display the configuration of the service that you have chosen in Application Fowarded. OK Click OK to save your changes. Cancel Click Cancel to exit this screen without saving. 11.4 The Port Triggering Screen Some services use a dedicated range of ports on the client side and a dedicated range of ports on the server side. With regular port forwarding you set a forwarding port in NAT to forward a service (coming in from the server on the WAN) to the IP address of a computer on the client side (LAN). The problem is that port forwarding only forwards a service to a single LAN IP address. In order to use the same service on a different LAN computer, you have to manually replace the LAN computer's IP address in the forwarding port with another LAN computer's IP address. Trigger port forwarding solves this problem by allowing computers on the LAN to dynamically take turns using the service. The VMG records the IP address of a LAN computer that sends traffic to the VMG9823-B10A User's Guide 160