ZyXEL VMG9823 User Guide - Page 76
Table 12, Label, Description
View all ZyXEL VMG9823 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Chapter 6 Broadband Figure 25 Network Setting > Broadband > Advanced The following table describes the labels in this screen. Table 12 Network Setting > Broadband > Advanced LABEL DSL Capabilities PhyR US PhyR DS Bitswap DESCRIPTION Enable or disable PhyR US (upstream) for upstream transmission to the WAN. PhyR US should be enabled if data being transmitted upstream is sensitive to noise. However, enabling PhyR US can decrease the US line rate. Enabling or disabling PhyR will require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and have it enabled. Enable or disable PhyR DS (downstream) for downstream transmission from the WAN. PhyR DS should be enabled if data being transmitted downstream is sensitive to noise. However, enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and have it enabled. Select Enable to allow the VMG to adapt to line changes when you are using G.dmt. SRA ADSL Modulation PTM over ADSL Bit-swapping is a way of keeping the line more stable by constantly monitoring and redistributing bits between channels. Enable or disable Seamless Rate Adaption (SRA). Select Enable to have the VMG automatically adjust the connection's data rate according to line conditions without interrupting service. Select Enable to use PTM over ADSL. Since PTM has less overhead than ATM, some ISPs use this for better performance. VMG9823-B10A User's Guide 76