ZyXEL VMG9823 User Guide - Page 38
Using WPS
View all ZyXEL VMG9823 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Chapter 4 Tutorials Thomas can now use the WPS feature to establish a wireless connection between his notebook and the VMG (see Section 4.3.2 on page 38). He can also use the notebook's wireless client to search for the VMG (see Section 4.3.3 on page 42). 4.3.2 Using WPS This section shows you how to set up a wireless network using WPS. It uses the VMG as the AP and ZyXEL NWD210N as the wireless client which connects to the notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCMCIA card). There are two WPS methods to set up the wireless client settings: • Push Button Configuration (PBC) - simply press a button. This is the easier of the two methods. • PIN Configuration - configure a Personal Identification Number (PIN) on the VMG. A wireless client must also use the same PIN in order to download the wireless network settings from the VMG. Push Button Configuration (PBC) 1 Make sure that your VMG is turned on and your notebook is within the cover range of the wireless signal. 2 Make sure that you have installed the wireless client driver and utility in your notebook. 3 In the wireless client utility, go to the WPS setting page. Enable WPS and press the WPS button (Start or WPS button). VMG9823-B10A User's Guide 38