ZyXEL VMG9823 User Guide - Page 192
Table 82, Label, Description
View all ZyXEL VMG9823 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Chapter 16 Firewall Figure 109 Access Control: Add/Edit The following table describes the labels in this screen. Table 82 Access Control: Add/Edit LABEL Filter Name DESCRIPTION Enter a descriptive name of up to 16 alphanumeric characters, not including spaces, underscores, and dashes. Order Select Source Device Source IP Address Select Destination Device Destination IP Address IP Type Select Protocol You must enter the filter name to add an ACL rule. This field is read-only if you are editing the ACL rule. Select the order of the ACL rule. Select the source device to which the ACL rule applies. If you select Specific IP Address, enter the source IP address in the field below. Enter the source IP address. Select the destination device to which the ACL rule applies. If you select Specific IP Address, enter the destiniation IP address in the field below. Enter the destination IP address. Select whether your IP type is IPv4 or IPv6. Select the transport layer protocol that defines your customized port from the drop-down list box. The specific protocol rule sets you add in the Security > Firewall > Service > Add screen display in this list. Protocol If you want to configure a customized protocol, select Specific Service. This field is displayed only when you select Specific Protocol in Select Protocol. Custom Source Port Choose the IP port (TCP/UDP, TCP, UDP, ICMP, or ICMPv6) that defines your customized port from the drop-down list box. This field is displayed only when you select Specific Protocol in Select Protocol. Enter a single port number or the range of port numbers of the source. VMG9823-B10A User's Guide 192