ZyXEL WAC6303D-S User Guide - Page 45

Hardware, NWA/WAC/WAX Series User's Guide, NWA1302-AC LEDs

Page 45 highlights

Chapter 3 Hardware Figure 19 NWA1302-AC LEDs The following table describes the LEDs. Table 14 NWA1302-AC LEDs LED COLOR STATUS PWR/SYS Amber Green Blinks amber for 1 second and green for 1 second alternatively. Green On Slow Blinking (On for 1 sec, Off for 1 sec) Fast Blinking (On 50 ms, Off 50 ms) Red On Management Green Fast Blinking (On for 50 ms, Off for 50 ms) Slow Blinking (Blink for 3 times, Off for 3 sec) On Slow Blinking (On for 1 sec, Off for 1 sec) Amber Green Amber Green Off Blinks amber for 1 second and green for 1 second alternatively Blinks amber and green alternatively 3 times and then turns solid green for 3 seconds. DESCRIPTION The LED blinks amber and green alternatively when the Zyxel Device is booting up. The Zyxel Device is ready for use. The wireless module of the Zyxel Device is disabled or failed. The Locator LED is on. There is a system error and the Zyxel Device cannot boot up, or the Zyxel Device suffered a system failure. The Zyxel Device is doing firmware upgrade. The Uplink interface is down. The Zyxel Device is managed by the NCC. The Zyxel Device is using default wireless settings, or the Zyxel Device is connected to the NCC but is unregistered with the NCC. The Zyxel Device is searching for (discovering) the NCC. The NCC is connecting to the registered Zyxel Device. The Zyxel Device is in standalone mode. NWA/WAC/WAX Series User's Guide 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304

Chapter 3 Hardware
NWA/WAC/WAX Series User’s Guide
45
Figure 19
NWA1302-AC LEDs
The following table describes the LEDs.
Table 14
NWA1302-AC LEDs
LED
COLOR
STATUS
DESCRIPTION
PWR/SYS
Amber
Blinks amber for 1
second and green for 1
second alternatively.
The LED blinks amber and green alternatively when the
Zyxel Device is booting up.
Green
Green
On
The Zyxel Device is ready for use.
Slow Blinking (On for 1
sec, Off for 1 sec)
The wireless module of the Zyxel Device is disabled or
failed.
Fast Blinking (On 50 ms,
Off 50 ms)
The Locator LED is on.
Red
On
There is a system error and the Zyxel Device cannot boot
up, or the Zyxel Device suffered a system failure.
Fast Blinking (On for 50
ms, Off for 50 ms)
The Zyxel Device is doing firmware upgrade.
Slow Blinking (Blink for 3
times, Off for 3 sec)
The
Uplink
interface is down.
Management
Green
On
The Zyxel Device is managed by the NCC.
Slow Blinking (On for 1
sec, Off for 1 sec)
The Zyxel Device is using default wireless settings, or the
Zyxel Device is connected to the NCC but is unregistered
with the NCC.
Amber
Blinks amber for 1
second and green for 1
second alternatively
The Zyxel Device is searching for (discovering) the NCC.
Green
Amber
Blinks amber and green
alternatively 3 times
and then turns solid
green for 3 seconds.
The NCC is connecting to the registered Zyxel Device.
Green
Off
The Zyxel Device is in standalone mode.