ZyXEL WAC6303D-S User Guide - Page 97
IP Setting
View all ZyXEL WAC6303D-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Chapter 9 Network • The NCC Discovery screen (Section 9.6 on page 103) configures the Zyxel Device's Nebula Control Center (NCC) discovery settings. 9.2 IP Setting Use this screen to configure the IP address for your Zyxel Device. To access this screen, click Configuration > Network > IP Setting. Figure 52 Configuration > Network > IP Setting Each field is described in the following table. Table 37 Configuration > Network > IP Setting LABEL DESCRIPTION IP Address Assignment Get Automatically Select this to make the interface a DHCP client and automatically get the IP address, subnet mask, and gateway address from a DHCP server. Use Fixed IP Address Select this if you want to specify the IP address, subnet mask, and gateway manually. IP Address Enter the IP address for this interface. Subnet Mask Enter the subnet mask of this interface in dot decimal notation. The subnet mask indicates what part of the IP address is the same for all computers in the network. Gateway Enter the IP address of the gateway. The Zyxel Device sends packets to the gateway when it does not know how to route the packet to its destination. The gateway should be on the same network as the interface. NWA/WAC/WAX Series User's Guide 97