ZyXEL ZYWALL USG 100 User Guide - Page 27
How to Set Up IPv6 Interfaces For Pure IPv6 Routing, 2.5.1 Setting Up the WAN IPv6 Interface
View all ZyXEL ZYWALL USG 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Chapter 2 How to Set Up Your Network 2.5 How to Set Up IPv6 Interfaces For Pure IPv6 Routing This example shows how to configure your ZyWALL Z's WAN and LAN interfaces which connects two IPv6 networks. ZyWALL Z periodically advertises a network prefix of 2006:1111:1111:1111::/64 to the LAN through router advertisements. Note: Instead of using router advertisement, you can use DHCPv6 to pass the network settings to the computers on the LAN. Figure 20 Pure IPv6 Network Example LAN Z WAN IPv6 IPv6 IPv6 2006:1111:1111:1111::/64 2.5.1 Setting Up the WAN IPv6 Interface 1 In the CONFIGURATION > Network > Interface > Ethernet screen's IPv6 Configuration section, double-click the wan1. 2 The Edit Ethernet screen appears. Select Enable Interface and Enable IPv6. Select Enable Stateless Address Auto-configuration (SLAAC). Click OK. Note: Your ISP or uplink router should enable router advertisement. ZyWALL USG100-PLUS User's Guide 27