2003 Chevrolet Silverado 1500 Pickup Owner's Manual - Page 155

The seat and mirror positions can also be recalled when placing the key in the ignition if programmed to do so through the Driver Information Center (DIC). To stop recall movement of the memory seat feature at any time, press one of the memory buttons or power seat controls. To store the seat exit position for driver 1 or 2, do the following: 1. Select the desired driver number by pressing and releasing the 1 or 2 button. The seat will move to the stored memory position. 2. Adjust the seat to the desired exit position. 3. Press and hold the exit button of the memory control for three seconds. A double chime will sound to let you know that the position has been stored for the identified driver (1 or 2). Easy Exit Seat The controls for this memory function are located on the driver's door. li)l) This button is used to program and recall the desired driver's seat position when exiting/entering the vehicle. The seat position, can be personalized for both driver 1 and driver 2. To use the seat exit position, do one of the following: Press the exit button on the memory control. Or, if this feature is enabled (active) in the DIC, then removing the key from the ignition will cause the seat to move to the exit position. 2-68