2013 Chevrolet Volt Owner Manual - Page 11

In Brief 1-5 Remote Start Use remote start to heat or cool the interior when the vehicle is plugged in to maximize electric range by utilizing electricity from the wall outlet. The engine may start to support the climate control operation. Normal operation of the system will return after the vehicle has been turned on. After entering the vehicle during a remote start, press the POWER O button on the center stack with the brake pedal applied to operate as normal. Door Locks Keyless Access Canceling Remote Start To cancel a remote start, do any of the following: . Activating the Remote Start 1. Aim the RKE transmitter at the vehicle. 2. Press and release Q on the RKE transmitter; the doors will lock. 3. Immediately, press and hold B until the turn signal lamps flash, or for approximately two seconds. Pressing B again during a remote start will turn the feature off. . Aim the RKE transmitter at the vehicle and press and hold B until the parking lamps turn off. Turn on the hazard warning flashers. Press the POWER O button on the center stack, with the brake pedal applied, then press the POWER O button again to turn the vehicle off. When the Remote Keyless Entry (RKE) transmitter is within 1 m (3 ft) of the driver door, the door can be locked and unlocked by pressing the door handle button. When unlocking from the driver door, the first press will unlock only that door; press again within five seconds to unlock all passenger doors. See Remote Keyless Entry (RKE) System Operation on page 2‑2. . See Remote Start on page 2‑8.