2013 Chevrolet Volt Owner Manual - Page 277

Vehicle Care 2. Push up on the aero panel to locate the bulb socket. 3. Turn the bulb socket counterclockwise to remove it from the bulb assembly. 4. Pull the bulb from the bulb socket. 5. Push a new bulb straight into the bulb socket. 6. Reinstall the bulb socket by lining up the tabs in the lamp assembly and turn it clockwise to lock it into place. 7. Replace the three inboard screws from the aero panel. 1. Press the spring clip on the right end of the lamp assembly to the left to unlock the lamp assembly. 2. Pull down on the lamp assembly to remove it from the fascia. 10-29 License Plate Lamp To replace one of these bulbs: 3. Turn the bulb socket (1) counterclockwise to remove it from the lamp assembly (3). 4. Pull the bulb (2) straight out of the bulb socket (1). 5. Push the replacement bulb straight into the bulb socket (1) and turn the bulb socket (1) clockwise to install it into the lamp assembly (3). 6. Reinstall the lamp assembly (3) into the fascia by inserting the left side first.