2013 Chevrolet Volt Owner Manual - Page 60

3-8 Seats and Restraints Raising the Seatback Notice: Damage to the safety belt or seatback locking mechanism can occur if the safety belt is caught between the rear seatback and the seatback locking mechanism. The safety belt must be out of the way when the rear seat is raised to the upright, locked position. If the safety belt is damaged, see your dealer and have it replaced. To raise the seatback: 2. Safety Belt Storage Clip 1. Make sure the safety belt is in the storage clip (2) before raising the seatback. The safety belt should not cross the seatback locking mechanism (1) when raising the seatback. 2. Raise the seatback and push it rearward to lock it into place. A tab near the seatback release lever retracts when the seatback is locked. 3. Push and pull the top of the seatback to be sure it is locked into position. 4. Return the safety belt to the safety belt guide after raising the seatback. Keep the seat in the upright, locked position when not in use. 1. Safety Belt Guide 2. Safety Belt Storage Clip 1. Remove the safety belt from the safety belt guide (1) and place it in the storage clip (2). The safety belt should remain in the storage clip while the seatback is in the folded position. 2. Pull the seatback release lever to unlock the seatback. A tab near the lever raises when the seatback is unlocked. 3. Fold the seatback forward. 1. Seatback Locking Mechanism