2014 Chevrolet Silverado 3500 HD Crew Cab Owner Manual - Page 453
2014 Chevrolet Silverado 3500 HD Crew Cab Manual
Page 453 highlights
Vehicle Care 10-87 { Warning Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 6. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock. The vehicles could be damaged too. Before you connect the cables, here are some basic things you should know. Positive (+) will go to positive (+) or to a remote positive (+) terminal if the vehicle has one. Negative (−) will go to a heavy, unpainted metal engine part or to a remote negative (−) terminal if the vehicle has one. Do not connect positive (+) to negative (−) or you will get a short that would damage the battery and maybe other parts too. And do not connect the negative (−) cable to the negative (−) terminal on the dead battery because this can cause sparks. battery. Use a remote positive (+) terminal if the vehicle has one. 9. Now connect the black negative (−) cable to the negative (−) terminal of the good battery. Use a remote negative (−) terminal if the vehicle has one. Do not let the other end touch anything until the next step. 10. Connect the other end of the negative (−) cable to a heavy, unpainted metal engine part or to the remote negative (−) terminal, on the vehicle with the dead battery. 11. Start the vehicle with the good battery and run the engine for a while. 12. Try to start the vehicle that had the dead battery. If it will not start after a few tries, it probably needs service. 5.3L Engine (4.3L, 4.8L, 6.0L, 6.2L and 6.6L Similar) 7. Connect the red positive (+) cable to the positive (+) terminal of the vehicle with the dead battery. 8. Do not let the other end touch metal. Connect it to the positive (+) terminal of the good