2014 Chevrolet Silverado 3500 HD Crew Cab Owner Manual - Page 66

3-4 Seats and Restraints { Warning If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. Bench Seat To adjust the seat: 1. Move the lever to the right to unlock the seat. 2. Slide the seat to the desired position and release the lever. 3. Try to move the seat back and forth to make sure it is locked into place. Folding the Bench Seat To fold the bench seat: 1. Push back on the front of the seatback. 2. Pull one of the release levers, at each end of the seat on the lower rear of the seatback, completely out. 3. While holding the lever out, fold the seatback forward until it rests on the seat. 4. Release the lever. Do not try to release the seatback before pulling the release levers or the release system can be damaged. { Warning A safety belt that is improperly routed, not properly attached, or twisted will not provide the protection needed in a crash. The person wearing the belt could be seriously injured. After raising the rear seatback, always check to be sure that the safety belts are properly routed and attached, and are not twisted.