2006 Lincoln Navigator Owner Guide 2nd Printing - Page 125

Lights To change the back-up lamp bulbs: 1. Make sure the headlamp switch is in the OFF position. 2. Remove the liftgate trim panel by removing the two trim bolts in the grab handle. 3. Remove the retaining nuts from the license plate housing to expose the bulb socket. 4. Turn the bulb socket counterclockwise and pull it out of the back-up lamp assembly. 5. Pull out the old bulb and replace it by pushing in a new bulb. 6. Push the connector back into the back-up lamp assembly and turn it clockwise to secure it in place. 7. Reinstall the liftgate trim panel. Replacing liftgate tail lamp bulb 1. Make sure the headlamp switch is in the OFF position. 2. Raise the liftgate and remove the two retaining nuts on the underside of the liftgate. 3. Pull the lamp assembly straight out (it will snap out of a plastic retaining grommet). 125 2006 Navigator (nav) Owners Guide (post-2002-fmt) USA (fus)