2006 Lincoln Navigator Owner Guide 2nd Printing - Page 126

Lights 4. Turn the wire harness counterclockwise to remove it from the lamp. 5. Pull out the bulb and replace it with a new one. 6. Turn the harness clockwise to install it. 7. Snap the lamp assembly back into place. 8. Replace the retaining nuts. High-mount brakelamp To change the high-mount brakelamp bulbs: 1. Remove the two screws holding the lamp assembly in place. 2. Pull the lamp assembly straight out. 3. Remove the wire harness. 4. Depress the four tabs that hold the light assembly on, one at a time, and pull the black bulb carrier away from the lamp. 5. Pull the old bulb out and replace with the new bulb. 6. Snap the black bulb carrier into the lamp assembly. 7. Replace the wire harness. 8. Replace the lamp assembly. 126 2006 Navigator (nav) Owners Guide (post-2002-fmt) USA (fus)