2006 Lincoln Navigator Owner Guide 2nd Printing - Page 127

Lights Replacing license plate lamp bulb The license plate bulbs are located in the license plate housing assembly on the liftgate. To change the license plate bulbs: 1. Make sure the headlamp switch is in the OFF position. 2. Remove the license lamp screw from the assembly. 3. Pull the lamp down and twist the bulb socket counterclockwise. Remove the bulb socket from the lamp. 4. Pull out the old bulb and push in the new bulb. 5. Install the bulb socket in the lamp assembly by turning it clockwise. 6. Install the lamp assembly and secure it with the retaining screw. Approach lamp/mirror turn signal bulb removal (if equipped) To change the bulbs: 1. Make sure the headlamp switch is in the OFF position and then fold the mirror forward. 2. Remove the torx screw on the bottom of the turn signal lens using a T-10 torx driver. 3. Pull the turn signal lens down to remove it from the mirror assembly. 4. Disconnect the bulb assembly from the lens. 5. Remove and replace the bulb. 6. Reverse the order to reassemble lamp and lens. 127 2006 Navigator (nav) Owners Guide (post-2002-fmt) USA (fus)