2006 Saab 9-2X Owner's Manual - Page 138
2006 Saab 9-2X Manual
Page 138 highlights
4-10 Climate control OFF position (Outside Air): Outside air is drawn into the passenger compartment. Push the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty. The indicator light will go off. AUTO: When the air inlet selection button is pressed for at least 1 second, the indicator flashes twice. The air inlet control is then adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. Pressing the air inlet selection button cancels the "AUTO" mode. Saab recommends using the AUTO position. ¢ Air conditioner button mode. Saab recommends using the AUTO position. NOTE The air conditioner's compressor does not operate with an outside temperature of 32°F (0°C) or lower. ¢ Temperature sensors 400601 Continued operation in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears. The button's positions and their functions are as follows: ON: The air conditioner operates while the fan is running. Push the button to select this position. The indicator light will illuminate. OFF:The air conditioner does not operate. Push the button a second time to select this position. The indicator light will go off. AUTO: When the button is pressed for at least 1 second, the indicator flashes twice. The air conditioner compressor operation is then adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. Pressing the button cancels the "AUTO" 1 2 400602 1) Interior air temperature sensor 2) Solar sensor The automatic climate control system employs several sensors. These sensors are delicate. If they are not treated properly and become damaged, the system may not be able to control the interior temperature correctly. To avoid damaging the sensors, observe the following precautions: