2006 Saab 9-5 Owner's Manual - Page 153

Starting and driving Automatic transmission 1 1 3 5 2 4 R 153 WARNING • Make it a habit to keep your foot on the brake when selecting a drive position, to prevent the car 98 creeping forward (or backward if reverse is selected). • The car must be at a standstill before P, R or N is selected. You have to have your foot on the brake pedal to move the lever out of P. If the car is still moving when a drive position is subsequently selected, this could cause a crash or damage the automatic transmission. • Never park the car with the selector lever in a drive position, even if the parking brake is on. • If you want to leave the car with the engine running, move the selector lever to P or N and apply the parking brake. IB471 Selector lever The electronic control module for the automatic transmission receives information on engine torque and road speed, and also controls the hydraulic pressure in the transmission to ensure that gear changing is as smooth as possible. The position of the selector lever is shown by the symbols adjacent to the lever and also by an indicator on the main instrument panel. If manual mode (M) is selected, the current gear is also displayed on the main instrument panel. The ignition key can only be removed when the selector lever is in the P position. NOTICE When the reverse gear is to be engaged the car must be at a standstill with the accelerator fully released. Lift the reverse lock-out collar and push the gear lever firmly to the right in neutral before easing it into reverse. Towing Towing of cars with manual transmission, see page 185.