2006 Saab 9-5 Owner's Manual - Page 69

Instruments and controls Entering values for the functions Dist. 1 Select Dist. using the i/SET button. 2 Hold i/SET depressed until a chime sounds and the selected function is marked. 3 Set the distance using or . 4 End with a brief press on the i/SET button. The calculated arrival time will then appear next to the distance. SID calculates arrival time using the set distance and average vehicle speed. The values are updated during the trip. If you take a break, this time is added to the previously calculated arrival time. After the distance to destination has decreased to zero, Dist. will function as a trip meter (see "Using Dist. as a trip meter"). The starting value for the trip meter will be the last distance set for the Dist. function. Example: 100 km is set for the Dist. function. Once the countdown has reached 0 km, the Dist. function will act as a trip meter, beginning at 100 km. Alarm 1 Select Alarm with the i/SET button. 2 Hold i/SET depressed until a chime sounds. Briefly press the i/SET button if you do not wish to change the alarm time. If you wish to change the alarm time, press or . End with a brief press on the i/SET button. ON appears to the right of the alarm time to indicate that the alarm will go off at the set time. When the alarm sounds, it can be deactivated with CLR. Activating speed warning 69 1 Select Speed W. with the i/SET button. 2 Hold i/SET depressed until a chime sounds. Briefly press the i/SET button if you do not wish to change speed. If you wish to change speed, press or . End with a brief press on the i/SET button. ON appears to the right of the speed if a warning will sound when vehicle speed exceeds the set speed. Disengaging speed warning 1 Select Speed W. with the i/SETbutton. 2 Briefly press the CLR button.