2006 Saab 9-5 Owner's Manual - Page 85

Instruments and controls Adaptation of ACC It is also possible to customize the ACC system, e.g. to adapt to driving and weather conditions. Function Operation in AUTO mode after adaptation Factory setting Function 85 Adaptation and restoration of factory settings is done by holding the respective button depressed approx. 2 seconds until a chime sounds. Make sure the ignition is ON. Display text in SID Display text in SID when during adaptation factory settings are restored ACC:AUTO RDEFR CTRL ACC:AUTO SEAT HEATING ACC:MANUAL RDEFR CTRL ACC:MANUAL SEAT HEATING The rear window heating will Heating is selected come on after the engine has manually. started if the outside temperature is below +5 °C. - This function helps to prevent ice or mist forming on the rear window in cold, damp weather. Fuel consumption may increase slightly. Seat heating comes on if the system determines that heating is necessary based on the temperature in the seat and the outside temperature. There are two settings for heating. Repeatedly pressing the button switches between low output, high output and off. Example: If you want the ACC system to handle activation and deactivation of rear window/door mirror heating, hold the button depressed approx. 2 seconds until a chime sounds. The display shows: ACC:AUTO RDEFR CTRL When "Adaptation of ACC" is done, it will apply until factory settings are restored.