2006 Saab 9-5 Owner's Manual - Page 26

26 Safety 5 Raise the vehicle head restraint to its highest position (see page 21 for detailed instructions). 6 If you are using a single tether, route the tether under the vehicle head restraint, and attach the tether hook to the top tether anchor. If you are using a dual tether, route the tether around the vehicle head restraint, and attach the tether hook to the top tether anchor. Tighten the top tether strap. The child restraint instructions will show you how. 7 Push and pull the child restraint in different directions to be sure it is secured at the lower anchors/safety belt and the top tether anchor. The child restraint shall be firmly attached to the vehicle. Securing a Child Restraint Designed for the LATCH System 9-5 Sedan: Before installation, please read through these instructions and the child restraint installation instructions. 1 Find the lower anchors for the seating position you want to use. The lower anchors are located where the bottom of the seatback meets the back of the seat cushion. Above each lower anchor, there is a label indicating its location (see picture). 2 Put the child restraint on the seat. 3 Attach and tighten the lower anchor attachments on the child restraint to the vehicle lower anchors. If your child restraint does not have the lower attachments, you will be using the lap-shoulder belt to secure the child restraint. The child restraint instructions will show you how. 4 The top tether anchor is located on top of the parcel shelf. Use the top tether anchor right behind the seating position you want to use. Open the top tether anchor trim cover to expose the anchor. Snap the cover to lock in open position. Child tether anchorages in parcel shelf, Saab 9-5 Sedan IB1698