2008 Subaru Impreza Owner's Manual - Page 171

Climate control 4-9 . Fan speed control dial: AUTO position . Air inlet selection button: Press for at least 1 second. (Indicator will flash twice.) . Air conditioner button: Press for at least 1 second. (Indicator will flash twice.) & To use as semi-automatic climate control system Each function can be individually set to AUTO mode independently of the others. Any function set to AUTO mode is controlled automatically. Any function not set to AUTO mode can be manually adjusted as desired. The temperature can be set within a range of 65 to 858F (20 to 308C). The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the desired fan speed. The dial's positions and their functions are as follows: OFF: The fan does not operate. AUTO: The fan speed is adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. SUBARU recommends using the AUTO position. Other positions: The fan speed can be adjusted in 7 steps. & Temperature control dial NOTE With the fan speed control dial in the AUTO position and the air flow control dial in the or " " position, the fan does not operate during engine warm-up until the engine coolant temperature exceeds approx. 1228F (508C). & Fan speed control dial This dial is used to set the desired interior temperature. With the dial set to your desired temperature, the system automatically adjusts the temperature of air supplied from the outlets such that the desired temperature is achieved and maintained. If the dial is turned fully counterclockwise, the system gives maximum cooling performance. If the dial is turned fully clockwise, the system gives maximum heating performance. - CONTINUED -