2008 Subaru Impreza Owner's Manual - Page 172

4-10 Climate control & Air flow control dial : Windshield defroster outlets NOTE When the dial is placed in the " " or " " position, the air inlet selection is automatically set to "outside air" mode. & Air inlet selection button OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty. The indicator light will go off. AUTO: When the air inlet selection button is pressed for at least 1 second, the indicator flashes twice. The air inlet control is then adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. Pressing the air inlet selection button cancels the "AUTO" mode. SUBARU recommends using the AUTO position. This dial has the following six positions. The outlets from which air is supplied in each position are as follows: AUTO: The air flow control is adjusted automatically in accordance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors. SUBARU recommends using the AUTO position. : Instrument panel outlets : Instrument panel outlets and foot outlets : Foot outlets and windshield defroster outlets (relatively little air from windshield defroster outlets) : Windshield defroster outlets and foot outlets WARNING Continued operation in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears. ON position (Recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position for fast cooling with the air conditioner or when driving on a dusty road. The indicator light will illuminate. OFF position (Outside Air): Outside air is drawn into the passenger compartment. Push the air inlet selection button to the