2008 Subaru Impreza Owner's Manual - Page 359

Maintenance and service 11-43 with the grooves in the rubber and slide the blade rubber assembly into the metal support until it locks. & Rear window wiper blade assembly 1. Raise the wiper arm off the rear window. 3. Pull the wiper blade assembly toward you to remove it from the wiper arm. 1) Stopper 4. Be sure to position the claws at the end of the metal support between the stoppers on the rubber as shown. If the rubber is not retained properly, the wiper blade may scratch the windshield. 2. Turn the wiper blade assembly counterclockwise. & Rear window wiper blade rubber NOTE The illustration shows the replacement procedure for type A rubber wiper blades, however the replacement procedure is the same for type B. Perform the replacement of type B wiper blades following the procedure in this section. - CONTINUED -