2008 Subaru Impreza Owner's Manual - Page 298
2008 Subaru Impreza Manual
Page 298 highlights
9-8 In case of emergency WARNING Do not use oil or grease on the wheel studs or nuts when the spare tire is installed. This could cause the nuts to become loose and lead to an accident. 12. Turn the jack handle counterclockwise to lower the vehicle. use your foot on the wheel nut wrench or a pipe extension on the wrench because you may exceed the specified torque. Have the wheel nut torque checked at the nearest automotive service facility. 4-door models 10. Before putting the spare tire on, clean the mounting surface of the wheel and hub with a cloth. 11. Put on the spare tire. Replace the wheel nuts. Tighten them by hand. 13. Use the wheel nut wrench to securely tighten the wheel nuts to the specified torque, following the tightening order in the illustration. The torque for tightening the nuts is 58 to 72 lbf·ft (80 to 100 N·m, 8 to 10 kgf·m). This torque is equivalent to applying approximately 88 to 110 lbs (40 to 50 kg) at the top of the wheel nut wrench. Never