2008 Subaru Impreza Owner's Manual - Page 272
2008 Subaru Impreza Manual
Page 272 highlights
7-50 Starting and operating . Shift the shift lever into neutral position (manual transmission vehicles only). " indicator light in the combination The " meter goes off when the cruise control is canceled. & To turn off the cruise control There are two ways to turn off the cruise control: . Push the "CRUISE" main switch button again. . Turn the ignition switch to the "Acc" or "LOCK" position (but only when the vehicle is completely stopped). When the difference between the actual vehicle speed and the set speed is less than 4 mph (6.8 km/h), the set speed can be increased 1 mph (1.6 km/h) each time by pressing the "RES/ACC" button quickly. ! To increase the speed (by accelerator pedal) 1. Depress the accelerator pedal to accelerate the vehicle to the desired speed. 2. Push the "SET/COAST" button once. Now the desired speed is set and the vehicle will keep running at that speed without depressing the accelerator pedal. & To change the cruising speed ! To increase the speed (by button) NOTE To resume the cruise control after it has been temporarily canceled and with vehicle speed of approximately 20 mph (32 km/h) or more, push the "RES/ACC" button to return to the original cruising speed automatically. " indicator light in the combination The " meter will automatically illuminate at this time. If the difference between the actual vehicle speed when the button is pushed and the speed last time you set is less than 4 mph (6.8 km/h), the vehicle speed will be lowered by 1 mph (1.6 km/h). This occurs because the cruise control system unit regards this operation as that intended to decrease the vehicle speed. Push the "RES/ACC" button and hold it until the vehicle reaches the desired speed. Then, release the button. The vehicle speed at that moment will be memorized and treated as the new set speed.