3Com 3CRWE875075ATAA User Guide - Page 23

Connect the free end of the antenna cable to the right-hand side connection on

Get 3Com 3CRWE875075ATAA - Wireless LAN Access Point 8750 PDF manuals and user guides
UPC - 662705487465
View all 3Com 3CRWE875075ATAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Back Back 1 Position the antenna so that there are minimal obstacles between it and any client with which it will communicate. While maintaining a direct line of sight between the antenna and a client is not strictly necessary, such an arrangement helps to ensure a strong signal. Ensure that access is available for routing the antenna cable from the antenna to the access point. 2 If they are installed, remove both arms of the standard detachable antenna, making sure not to handle the tips of the antenna. 3 Connect one end of the optional antenna cable to the antenna and secure the antenna in place. 4 Connect the free end of the antenna cable to the right-hand side connection on the access point, as shown in the illustration above. 5 Make certain that the antennas and antenna masts are appropriately grounded to prevent injury or damage from lightning strikes. 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
23
1
Position the antenna so that there are minimal obstacles between it and any client
with which it will communicate. While maintaining a direct line of sight between
the antenna and a client is not strictly necessary, such an arrangement helps to
ensure a strong signal. Ensure that access is available for routing the antenna cable
from the antenna to the access point.
2
If they are installed, remove both arms of the standard detachable antenna, making
sure not to handle the tips of the antenna.
3
Connect one end of the optional antenna cable to the antenna and secure the
antenna in place.
4
Connect the free end of the antenna cable to the right-hand side connection on the
access point, as shown in the illustration above.
5
Make certain that the antennas and antenna masts are appropriately grounded to
prevent injury or damage from lightning strikes.
Back
Back