3Com 3CRWE875075ATAA User Guide - Page 49

WPA CONFIGURATION FOR WINDOWS XP The following table shows how to configure the access point to support the various authentication and encryption options available for Windows XP Wireless Zero Configuration. The following notes apply to configuring the access point for WPA under Windows XP: o A WPA-capable wireless network interface card is required. o The Windows XP Support Patch for Wireless Protected Access, which you can download from the Microsoft Web site, is required. o To allow WEP clients, clear the WPA Configuration Required check box and enter an appropriate WEP key. o For all WPA configurations, 802.1x must be enabled on the Authentication page. Windows XP Wireless Zero Configuration Access Points 8200/8250/8500/8700/8750 Authentication Open Shared WPA Encryption Disabled WEP Disabled WEP AES TKIP WEP Authentication Open System Open System Not available Shared Key Not available on 8200 Open System Open System Encryption Disable Enable Enable Enable Enable Other Enter static keys under WEP Configuration Enter static keys under WEP Configuration WPA Configuration: Required Multicast Cipher Mode: TKIP WPA Key Management: WPA 802.1x WPA Configuration: Required Multicast Cipher Mode: WEP WPA Key Management: WPA 802.1x 49