3Com ADSL Wireless 11g Firewall Router User Guide - Page 34
Routing Mode over ATM RFC 1483 Routed Mode, WAN IP, Subnet Mask, Default Gateway, VPI/VCI
UPC - 662705905136
View all 3Com ADSL Wireless 11g Firewall Router manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
34 CHAPTER 4: RUNNING THE SETUP WIZARD Routing Mode over ATM (RFC 1483 Routed Mode) To setup the Router for use with an RFC1483 routed connection: Figure 21 Routing Mode Screen 1 Enter your Internet IP address in the WAN IP text box. 2 Enter the subnet mask in the Subnet Mask text box. 3 Enter the default router in the Default Gateway text box. 4 Enter the DNS address in the DNS text box. 5 Enter your VPI and VCI information in the VPI/VCI text boxes. 6 Select the encapsulation type (LLC or VC MUX) in the Encapsulation drop-down list. This information will have been provided to you by your ISP. 7 Check all of your settings, and then click Next.The Wireless Settings screen is displayed.
34
C
HAPTER
4: R
UNNING
THE
S
ETUP
W
IZARD
Routing Mode over ATM (RFC 1483 Routed Mode)
To setup the Router for use with an RFC1483 routed connection:
Figure 21
Routing Mode Screen
1
Enter your Internet IP address in the
WAN IP
text box.
2
Enter the subnet mask in the
Subnet Mask
text box.
3
Enter the default router in the
Default Gateway
text box.
4
Enter the DNS address in the
DNS
text box.
5
Enter your VPI and VCI information in the
VPI/VCI
text boxes.
6
Select the encapsulation type (LLC or VC MUX) in the
Encapsulation
drop-down list. This information will have been provided to you by your
ISP.
7
Check all of your settings, and then click
Next
.The Wireless Settings
screen is displayed.