3Ware 9500S-4LP Installation Guide - Page 111
position it over the card, as shown in s 6 and 7.
UPC - 693494950045
View all 3Ware 9500S-4LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Installation Instructions 4 Make sure the battery cable is fastened under the cable management clips, as shown in Figure 5. Cable management clips Figure 5. Battery cable inserted through cable management clips 5 Match the clips on the end of the BBU to the slots on the edge of the controller to create a hinge and rotate the BBU to position it over the card, as shown in Figures 6 and 7. Figure 6. Clips on the BBU match to slots on the controller Hole for post Figure 7. BBU rotates into position on the controller www.3ware.com 103
Installation Instructions
www.3ware.com
103
4
Make sure the battery cable is fastened under the cable
management clips, as shown in Figure 5.
Figure 5.
Battery cable inserted through cable management clips
5
Match the clips on the end of the BBU to the slots on the edge
of the controller to create a hinge and rotate the BBU to
position it over the card, as shown in Figures 6 and 7.
Figure 6.
Clips on the BBU match to slots on the controller
Figure 7.
BBU rotates into position on the controller
Cable
management
clips
Hole for post