3Ware 9500S-4LP Installation Guide - Page 49

Right, Arrow, Create Unit, Enter, Create Disk Array, key to move to

Get 3Ware 9500S-4LP - Escalade RAID Controller PDF manuals and user guides
UPC - 693494950045
View all 3Ware 9500S-4LP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 49 highlights

Specifying the Unit Configuration You may include from one to twelve drives in the unit, depending on the number available. (For information about how many drives to select for a given RAID level, see Table 2 on page 31.) Note: To include drives that are part of an existing unit you must first delete the other unit. Be cautious in doing this, as any existing data on that unit will be overwritten. Figure 10. Asterisks Next to Selected Drives 2 After all drives for the unit are selected, use the Tab or Right Arrow key to move to the Create Unit button and press Enter. The Create Disk Array screen appears (see Figure 11 and Figure 12 for examples). 3 Make sure that the proper drives are listed. www.3ware.com 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Specifying the Unit Configuration
www.3ware.com
41
You may include from one to twelve drives in the unit,
depending on the number available. (For information about
how many drives to select for a given RAID level, see Table 2
on page 31.)
Note:
To include drives that are part of an existing unit you
must first delete the other unit. Be cautious in doing this, as any
existing data on that unit will be overwritten.
Figure 10.
Asterisks Next to Selected Drives
2
After all drives for the unit are selected, use the
Tab
or
Right
Arrow
key to move to the
Create Unit
button and press
Enter
.
The
Create Disk Array
screen appears (see Figure 11 and
Figure 12 for examples).
3
Make sure that the proper drives are listed.