3Ware 9500S-4LP Installation Guide - Page 51
Enter, arrow keys, Array's, Write Cache State, Stripe Size, to move to the field
UPC - 693494950045
View all 3Ware 9500S-4LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Specifying the Unit Configuration To select the desired RAID configuration 1 Press Enter in the RAID Configuration field to display the available RAID levels for the number of drives you selected. Figure 13. List of Configuration Choices for Four Drives 2 Use the arrow keys to highlight the desired RAID configuration and press Enter. For information about the different RAID levels and when to use each, see "Understanding RAID Concepts and Levels" on page 28. To enable or disable write cache and set striping size The write cache and striping size parameters depend on the type of RAID level you selected. Note: You can enable or disable the write cache again later without affecting the configuration. However, you cannot change the stripe size later without reconfiguring the unit. 1 Use the arrow keys or press Tab to move to the field Array's Write Cache State. 2 Select whether you want the write cache to be enabled or disabled for this unit. The default is for write cache to be enabled. For more information about write cache, see page 31. 3 Press Tab to move to the field Stripe Size and select the desired stripe size (16KB, 64KB, or 256KB). www.3ware.com 43