3Ware 9500S-4LP Installation Guide - Page 33

ware 9000 Series Serial ATA RAID, Controller User Guide, Under Windows - raid driver

Get 3Ware 9500S-4LP - Escalade RAID Controller PDF manuals and user guides
UPC - 693494950045
View all 3Ware 9500S-4LP manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Moving Units from an 8000 Controller to a 9000 Controller 4 Reboot the system and enter the 3ware 9000 series BIOS (3BM) by pressing Alt-3. Enable the Export JBOD policy on the Policy screen. (The next section in this guide, "Configuring Units", describes how to work in 3BM. Additional information about 3BM is available in 3ware 9000 Series Serial ATA RAID Controller User Guide.) 5 Press the F8 or Esc key to save and exit. To move legacy JBOD units under Windows 1 Install the 9000 controller in your system, while leaving the 8000 controller installed. 2 Install the Windows driver. (For details, see "Driver Installation Under Windows" on page 53.) 3 Power down the system, disconnect the drives from the 8000 controller and remove that controller from the system. 4 Attach the drives to the 9000 board. 5 Reboot the system and enter the 3ware 9000 series BIOS (3BM) by pressing Alt-3. Enable the Export JBOD policy on the Policy screen. (The next section in this guide, "Configuring Units", describes how to work in 3BM. Additional information about 3BM is available in 3ware 9000 Series Serial ATA RAID Controller User Guide.) 6 Press the F8 or Esc key to save and exit. www.3ware.com 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
Moving Units from an 8000 Controller to a 9000 Controller
www.3ware.com
25
4
Reboot the system and enter the 3ware 9000 series BIOS
(3BM) by pressing Alt-3. Enable the Export JBOD policy on
the Policy screen. (The next section in this guide, “Configuring
Units”, describes how to work in 3BM. Additional information
about 3BM is available in
3ware 9000 Series Serial ATA RAID
Controller User Guide
.)
5
Press the
F8
or
Esc
key to save and exit.
To move legacy JBOD units under Windows
1
Install the 9000 controller in your system, while leaving the
8000 controller installed.
2
Install the Windows driver. (For details, see “Driver Installation
Under Windows” on page 53.)
3
Power down the system, disconnect the drives from the 8000
controller and remove that controller from the system.
4
Attach the drives to the 9000 board.
5
Reboot the system and enter the 3ware 9000 series BIOS
(3BM) by pressing Alt-3. Enable the Export JBOD policy on
the Policy screen. (The next section in this guide, “Configuring
Units”, describes how to work in 3BM. Additional information
about 3BM is available in
3ware 9000 Series Serial ATA RAID
Controller User Guide
.)
6
Press the
F8
or
Esc
key to save and exit.