3Ware 9650SE-2LPB-10 CLI Guide - Page 32
show ver, show alarms [reverse], show diag, show rebuild, reverse
UPC - 693494601022
View all 3Ware 9650SE-2LPB-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 2. CLI Syntax Reference Example: Typical output of the Show command for a system with an enclosure looks like the following: //localhost> show Ctl Model Ports Drives Units NotOpt RRate VRate BBU c0 9650SE-4LPML 4 2 1 0 4 4 - Encl Slots Drives Fans TSUnits Ctls e0 4 2 1 1 1 The output above shows the enclosure summary information with the name of the enclosure, the protocol used, the number of drive slots, the number of drives, the number of fans, the number of temperature sensors, and the number of controllers that are associated with the enclosure. show ver This command will show the CLI and API version. Example: //localhost> show ver CLI Version = 2.00.03.0xx API Version = 2.01.00.xx In the above example, "xx" stands for the actual version. See the Release Notes for details. show alarms [reverse] This command shows the alarms or AEN messages of all controllers in the system. The default is to display the most recent message first. The reverse attribute displays the most recent message last. show diag This command shows the diagnostic information of all controllers in the system. show rebuild This command displays all rebuild schedules for the 9000 controllers in the system. The rebuild rate is also applicable for initializing, migrating, and recovery background tasks. 26 3ware Serial ATA RAID Controller CLI Guide