3Ware 9650SE-2LPB-10 CLI Guide - Page 54
/cx show verify, Setting Up a Verify Schedule
UPC - 693494601022
View all 3Ware 9650SE-2LPB-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Chapter 2. CLI Syntax Reference u0 RAID-5 INITIALIZING 0 - 64K 521.466 ON OFF Port Status Unit Size Blocks Serial p0 NOT-PRESENT - - - - p1 OK u0 76.33 GB 160086528 Y2NXL7FE p2 NOT-PRESENT - - - - p3 OK u0 76.33 GB 160086528 Y2NXLB9E p4 NOT-PRESENT - - - - p5 OK u0 76.33 GB 160086528 Y2NXQPZE p6 NOT-PRESENT - - - - p7 OK u0 76.33 GB 160086528 Y2NXM4VE p8 OK u0 74.53 GB 156301488 3JV3WTSE p9 OK u0 74.53 GB 156301488 3JV3WRHC p10 OK u0 74.53 GB 156301488 3JV3WQLQ p11 OK u0 74.53 GB 156301488 3JV3WQLZ Name OnlineState BBUReady Status Volt Temp Hours LastCapTest bbu On Yes OK OK OK 0 xx-xxx-xxxx /cx show verify 9000 series controllers support background tasks and allow you to schedule a regular time when they occur. Verify is one of the supported background tasks. Rebuild and selftest are other background tasks for which there are separate schedules. Migrate and initialize are additional background tasks that follow the same schedule as rebuild. For each background task, up to 7 time periods can be registered, known as slots 1 through 7. Each task schedule can be managed by a set of commands including add, del, show and set a task. Background task schedules have a slot id, start-day-time, duration, and status attributes. For details about setting up a schedule for background verify tasks, see "Setting Up a Verify Schedule" on page 51. Verify activity verifies all units based on their unit type. Verifying RAID 1 involves checking that both drives contain the exact data. On RAID 5 and RAID 6, the parity information is used to verify data integrity. RAID 10 and 50 are composite types and follow their respective array types. On 9000 series, non-redundant units such as RAID 0, JBOD, single, and spare, are also verified (by reading and reporting un-readable sectors). If any parity mismatches are found, the array will be automatically background initialized. (For information about the initialization process, see the user guide that came with your 3ware RAID controller.) The show verify command displays the current verify background task schedule as illustrated below. 48 3ware Serial ATA RAID Controller CLI Guide