3Ware 9650SE-2LPB-10 CLI Guide - Page 91
/cx/bbu show serial, /cx/bbu show fw, /cx/bbu show bootloader, the BBU's boot loader version.
UPC - 693494601022
View all 3Ware 9650SE-2LPB-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
BBU Object Commands /cx/bbu show serial This command shows the BBU serial number. /cx/bbu show fw This command shows the BBU firmware version number. /cx/bbu show pcb This command shows the PCB revision number on the BBU. /cx/bbu show bootloader This command shows the BBU's boot loader version. /cx/bbu show all This command shows the current settings of all BBU-related attributes: ready, status, batinst, lasttest, volt, temp, cap, serial, fw, pcb, bootloader. Example: //localhost> /c1/bbu show all /c1/bbu Firmware Version = BBU: 1.04.00.007 /c1/bbu Serial Number = Engineering Sample. /c1/bbu BBU Ready = Yes /c1/bbu BBU Status = OK /c1/bbu Battery Voltage = OK /c1/bbu Battery Temperature = OK /c1/bbu Estimated Backup Capacity = 241 Hours /c1/bbu Last Capacity Test = 22-Jun-2004 /c1/bbu Battery Installation Date = 20-Jun-2004 /c1/bbu Bootloader Version = BBU 0.02.00.002 /c1/bbu PCB Revision = 65 //localhost> www.3ware.com 85